首页
 本室介绍
 研究人员
 学术委员会
 科学研究
 研究平台
 学术交流
 人才培养
 联系我们
English Version
 当前位置:网站首页 > 科学研究 > 学术成果 > 浏览正文
我室论文在IEEE Tran. on DEI上发表
 更新时间:2014年02月19 【字体: 】 

 Guo-Ming Ma; Cheng-Rong Li; Rui-Duo Mu; Jun Jiang; Ying-Ting Luo, "Fiber bragg grating sensor for hydrogen detection in power transformers," Dielectrics and Electrical Insulation, IEEE Transactions on , vol.21, no.1, pp.380,385, February 2014(SCI IF: 1.228)

 

A novel hydrogen sensor is designed on the basis of Fiber Bragg grating (FBG) sensing technique. The sensor can be arranged inside the transformer. It has several advantages, such as fast fault detection and location, immunity to electromagnetic interference, quasi-distribution measurement and real-time monitoring. The principle of the proposed FBG hydrogen sensor is based on changes of the physical properties of palladium films which absorb hydrogen. A thick palladium layer prepared by magnetron sputtering is used to achieve high sensitivity. Meanwhile, polyimide is added into the adhesive layer to improve the reliability of the sensor. Partial discharge experiments demonstrated that the wavelength shift of the FBG hydrogen sensor varies linearly with the concentration of hydrogen dissolved in the transformer oil. It is hardly disturbed by other factors. The hydrogen sensing experiment in oil at a temperature of 80°C revealed that the sensitivity of the sensor remains same as the temperature varies, ranging from room temperature to operating temperature of the power transformer. Thus, the proposed sensor can work properly under the operating temperature of power transformers.

 

关于我们  | 招聘英才 | 管理登陆 |

华北电力大学 高电压及电磁兼容北京市重点实验室 版权所有
地址:北京市昌平区回龙观北农路2号 邮编:102206
京ICP备11028889号-1